Edelrid jul atc belay device1/27/2024 Many climbers still talk about belay plates when using tubular devices. Even today, standard tubers basically correspond to the original Sticht plate. All EDELRID tubular belay devices confrom to the stipulated values in the EN 15151-2 standard. Dynamic belaying only possible via body dynamicsĪccording to the German Alpine Club (DAV), standard tubers are now by far the most used belay devices.Suitable for use with half ropes and twin ropes (depending on model).Very high safety reserves due to higher braking performance.However, this is not mandatory and each manufacturer has its own policy on this issue. As suggested by the EN 15151-2 standard, our assisted braking tubers are also tested as manual braking devices. It should be noted that due to the enormously high braking performance of the assisted braking tuber on the rope, a dynamic belaying technique should always be utilized. Nevertheless, the brake-side hand principle must of course also be adhered to when using an assisted braking tuber. The thicker the rope, the greater the friction generated and thus the effective braking of the rope. The extremely high braking performance can only be guaranteed if the correct rope diameter is used. However, it is vital to always follow the manufacturer's instructions regarding the carabiners to be used and the permitted rope diameter. Assisted braking tubers offer significantly higher safety reserves than standard tubers. Therefore catching a fall is less dependent on the belayer's manual force. These devices have a mechanism which, in the event of a fall, creates such strong friction that the rope can no longer run through. Added safety! In principle, a so-called assisted braking tuber works exactly like normal tubular belay devices, even if the shape does not always suggest it.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |